Friday 6 November 2015

Books Vignette Progress Two

Today I began work on another version of the bay display window for my altered books vignette. I had thought of doing a round window, but decided that for my first window attempt I should probably follow a set of instructions, so I reached for my book, The Dolls' House Shopkeeper by Lionel and Ann Bernard, published by David & Charles. Their design for a toy shop had a nice rectangular bay window, and I decided that I could use the decorative muntins  used for the door to make the window match for the shop front.

 

So here are the two side panels of the bay window, with the framework for the window and the display shelf, in the gluing jig. I made lots of mistakes as I went along! Although I was making notes re sizes and measurements, I forgot, for example, that I had to subtract twice the 1/8" measurement for the height of the side windows. So although they were glued, I had to take them apart and cut them down 1/8" and then re-glue them. As a result, I only got the two side panels made. The front will, hopefully, be added tomorrow.



The books are not yet glued together, so they are being held in place with round elastic. Here are the two side panels, with the decorative muntins, in place in the window opening; friction fit only at this point, I won't glue again until I am sure I did it correctly! Come to think of it, I will have to add a  inner window lining once I cut the opening in the gator board inside box, unless I can figure out a way to wrap the wallpaper around that opening....

My hope is still to make a small sloping roof over the window; ideally, I would like to faux finish it to look like verdigrised copper. My thought right now is to shape the roof from balsa wood, and then add a paint and paper finish to make it look like copper. We'll see if I can manage it.





1 comment:

  1. Cada vez va teniendo mejor aspecto,buenos avances!!!
    Besos.

    ReplyDelete